Pet Outdoor Supplies

How to use the dog training function: 1. The remote control distance of the dog trainer can reach up to 250 meters 2. Press the power button to start the product, the red power indicator light is on, the digital display is off, and the function indicator is green when the dog trainer mode is on. 3. Independent "alarm", "vibration", and "electrostatic shock" three function buttons to choose from. 4. When selecting the "Alarm" function, you can press the corresponding function button. If you need to continue the alarm training function, press and hold the button until you do not need to train to let go. 5. When selecting the "vibration" function, you can press the corresponding function button. If you need the continuous alarm training function, press and hold the button until you don't need to train to let go. 6. When the "static" function is selected, the static intensity can be adjusted by the static intensity adjustment knob, 0-100 levels can be adjusted freely, and the corresponding function button can be pressed. If you need to continue the alarm training function, press and hold the button until no training is required Just let go. 7. The electrostatic strength adjustment will keep the last operation. For example, when you adjust the rotary button to 50 gears, the electrostatic strength will still remain at 50 gears after the product is turned off and restarted. If you need to change the gears, you can directly adjust the knob. 8. When using the dog trainer function, if you only train one dog, you can directly operate the dog trainer. If you train multiple dogs, when you operate the dog trainer, they will be trained at the same time and receive the same functional signal synchronously. , A dog that does not need to be trained, just turn off the power of its receiver. How to use outdoor electronic wireless fence function: Press the power button to start this product, the red power indicator light is on, and when the digital display is on, it is in outdoor electronic wireless fence mode 1. The outdoor electronic wireless fence is centered on the transmitter, and the maximum remote control radius is 150 meters; 2. Adjust the signal strength through "+" and "-", and adjust freely according to the 001-100 range, the corresponding receiver distance is 15-150 meters, that is, the 001 range corresponds to 15 meters, the 100 range corresponds to 150 meters, and the intermediate value can be free Adjust, the signal strength will be shown on the display. 3The electrostatic intensity can be adjusted by the electrostatic intensity knob, 0-100 gears can be adjusted freely 4 When the dog exceeds the set range of activity, the receiver it wears will automatically start the training function, and vibrate for about 3-5 seconds, then stop the vibration, switch to static electric shock for about 3-5 seconds to remind the dog to return Safe area. If the dog continues to move forward, it will vibrate for about 3-5 seconds and the static electricity will be shocked for about 3-5 seconds. After that, the dog will feel the vibration warning and will not move on. 5. If the dog does not listen to the vibration warning or runs too fast beyond the wireless fence range, you can switch the dog training mode of the transmitter to train the dog, and the dog returns to the wireless fence range and switch to the electronic wireless fence mode. 6. One transmitter can support multiple receivers to work at the same time. 7. The transmitter is fully charged and can work continuously for about 20 hours 8. Charging: DC5V, the original charger is better. note: 1. When the transmitter is low in power, the power indicator will flash slowly; during charging, the power indicator will flash quickly; after fully charged, the power indicator will be on 2. Turn off and click How to use the receiver: 1. Press the "ON/OFF" button and the indicator light flashes 2 times and you can let go. If the release function continues to be effective after flashing for several times, the signal light will be on when the machine is turned on. Turn off and click 2. The receiver adopts the power supply mode. After plugging in the charging cable, the signal light will flash, and when the battery is full, the signal light will stay on. 3. If the receiver stays still within 30 seconds, it will enter a sleep state, and touch the receiver to wake it up, which can save power. 4. The LED test lamp is used to test the intensity of static electricity. The brighter the test lamp, the stronger the electric shock intensity. 5. The receiver is waterproof, rechargeable and practical. 6. The conductive pole can be replaced, choose a longer or shorter one according to the dog's hair. Note: When the receiver is in low power, the signal light flashes. Wireless dog fence rechargeable pet restraint system collar The kit includes: 1 x wireless transmitter 1 x receiver collar 1 x adjustable TPU traction rope 1 x adapter (we will send you the adapter according to your country) 1 x cable 1 x