Waterproof Rechargeable Receiver Underground Fence for Small Medium

The basics

*Features*: * Efficient Dog Fencing System *: The transmitter,receiver and boundary wire forms an effective fencing system together to deter our dogs from the designated area,which greatly ensures our pets’ safety. The boundary wire creates an effective signal field when the transmitter is working. If your dog tends to walk out of the boundary,the transmitter will emit a harmless radio signal. Once the signal is detected by the receiver,it will automatically start beep or shock mode to urge your dog to go back into the boundary. * 2 Effective Training Modes *: The receiver works automatically once you start up the system. It will send beep(4 levels) and shock(4 levels) as your dog try to cross the boundary wire. The closer your dog goes,the more intense the shock will be,effectively train him back to the play area you set. * Adjustable Control Distance Collar *: The transmitter comes with .75 acre signal field range and 100 adjustable levels. The remote control distance can be increased .5m/1.6ft every 10 levels. The wire break warning can tell you in time if the wire is broken. Made of TPU,the collar strap is 28.3in long and equips with 34 holes in total,which can be adjusted to fit your dog’s neck properly. Fit for dog of all sizes. * Multiple Dogs Support *: One transmitter can pair with multiple receivers. With the 300mAh inbuilt rechargeable battery,our receiver keeps standby for around 2 days after fully charged for 2-4 hours. If the red indicator flashes quickly,it means the receiver needs to be charged. In addition,made of durable ABS material and featured with IPX7 waterproof level,our receiver greatly extends its service life,allows your dog to play in wet grass or rainy weather. Note:Our package only contains 1 receiver and 1collar strap. * Easy To Test Use *: Easy to test. First,pull out at least 4m/13ft long boundary wire and strip off the insulating layer of both ends. Second,make an enclosed loop with the wire and insert both ends into the terminals on the transmitter. Third,install 2 metal probes on the bottom of the receiver,and put the test bulb on. Fourth,turn on the transmitter after inserting the power cord. Fifth,hold the receiver close to the boundary wire and observe. Easy to use. Comes with 20 training flags for you carry out proper training to ensure that the dog understands the boundaries and responds appropriately to the warning signals. Friendly

Reminder

1. It’s important to adjust the collar to properly fit the dog’s neck. 2. For long-haired dogs,please trim some hair on your dog’s neck to ensure good contact of the metal probes. 3. It’s recommended to wear the collar for less than 8 hours per day. If possible,reposition the collar on the pet's neck every 1 to 2 hours. 4. Please keep this receiver away from children to avoid their playing causing unintended electric shock. 5. Beep and shock mode can’t adjust level intensity. 6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals. 7. If your dog is aggressive,you’d better to consult with an animal professional before using our electronic dog fence system. 8. Only suitable for dogs. *Specifications*: Product

Type

Electric Dog Fencing System

Material

ABS Collar Strap

Material

TPU Transmitter

Voltage

100-240V/60Hz Receiver

Input

DC12V/1A Inbuilt Battery(Receiver): 300mAh Rechargeable Battery Receiver

Runtime

Around 2 Days Receiver Charging

Time

Around 2-4Hours Receiver

Modes

Beep(4 Levels); Electric Shock(4 Levels) Waterproof Level(Receiver): IPX7 Signal Field

Range

≤3017 Square Meters/32474Square FT/0.75Acre Adjustable Levels(Transmitter): 100 Levels Remote Control

Distance

Increases 0.5M/1.6FT Every 10 Levels Boundary Wire

Length

200m/656FT Suggested Wire Bury

Depth

More Than 1in Underground Per Flag Length:19.5cm/7.7in Charging Cable Length(With Adapter): 102cm/3.3ft Collar Strap

Length

72cm/28.3in Transmitter

Size

14.3x8x3cm/5.63x3.15x1.18in Transmitter

Weight

93g/0.26lbs Receiver

Size

7.3x4.1x3cm/2.9x1.6x1.18in Receiver

Weight

56g/0.12 lbs Package

Size

31*21*5.5cm/12.2*8.27*2.17in Package

Weight

986g/2.17 lbs *Package Lists*: 1x Transmitter 1x Receiver 1x Collar Strap 1x Test Bulb 1x Adapter with 2 Split Cords 1 Coil x Boundary Wire 20 x Training Flags 2 x Long Metal Probes 2 x Short Metal Probes 2 x Screws 2 x Plastic Anchors 1x User Manual

Holiday season: allow 1–3 business days to process + 5–7 business days for delivery. Free shipping on every order until Dec 25, no minimum.

Yes, within 60 days of delivery. Items must be unworn with tags attached. See our Return Policy for all the details.

Shipping to: United Kingdom (Change)