Brown Kitchen, Dining & Bar

Name: New 28 even QQ expression Chocolate mould Ice tray DIY can be put into the oven Material: food grade silicone Weight: 60G/piece Packing: OPP packaging Cleaning and maintenance of silicone molds 1. Before using for the first time, it can be cleaned with water or detergent to remove surface dust. Before the mould is used for baking, a small amount of butter can be applied to the inside of the mould. When using continuous mode, if there is an empty groove, water can be added to the empty groove, and air burning is prohibited. 2. After each use, soak in the diluted detergent for 10-30 minutes. When cleaning, please wash it with soft cloth. Do not use rough cleaning balls and other items to avoid scratch damage to the mould. After cleaning, please dry it and place it in the storage box. The silica gel is easy to react with static electricity, and it will adsorb tiny particles and dust in the air. If it is not used for a long time, avoid direct exposure to the air. 3. When used in the oven, be sure to place it in the middle of the oven, keep a distance of about 10cm from the heating tube, and keep a distance of 5cm from the wall of the oven to avoid damage to the mould due to high temperature. 4. Some molds have cracks. This is cut at the time of leaving the factory, which is convenient for buyers to demould. If you do not cut, you cannot release the mould. When in use, place the plastic wrap on the incision, put on the plastic wrap or put on the rubber band and pour in the liquid. Silicone mould product features: 1. Silicone Silicone is mainly composed of silica gel, a natural component found in sand, stone and crystal. Not rubber rubber, not plastic plastic! Silica gel is a stone on the beach, low in carbon and environmentally friendly. 2. Silica gel has high flexibility, corrosion resistance and temperature resistance. It is suitable for cooking and baking. It is the best raw material for direct contact with food, and it is simple and practical. 3. Through testing, health and natural antibacterial, can prevent the breeding of bacteria and fungi. Therefore, there are a large number of silicone products in baby products and medical supplies. Such as: pacifier, silicone plastic and so on. 4. Recyclable, durable and low energy consumption. 5. It has stable structural mechanical properties, so it has extreme temperature resistance and wide temperature range. The lowest temperature resistance is 40 degrees below zero, the highest temperature is 230 degrees, and it is evenly heated by heat. 6. It has corrosion resistance to cleaning agents and other kinds of corrosive substances and is easy to clean. 7. After use, no material will stick to the mould.